فحوى الكرات

إرسال

Thrust ball bearings are classified into those with flat seats or aligning seats depending on the shape of the outer ring seat (housing washer). They can sustain axial loads but no radial loads. For Single-Direction Thrust Ball Bearings, pressed steel cages and machined brass cages are usually used The cages in Double- Direction Thrust Ball Bearings are the same as those in Single-Direction Thrust Ball Bearings of the same diameter series.
Available in two designs: single direction and double direction.
To accommodate initial misalignments in an assembly both designs are available with spherical aligning seats or aligning seat washers.
High quality steel-ultra clean steel to extend bearing life by up to 80%.
Advanced Grease Technology — NSK lubricants that can extend grease life and performance.High Grade Balls — Quiet and smooth operation even at high speed.Optional seating rings take initial misalignment.

عرض المزيد

Bearing Number	Bore Dia	Outer DIa	Width	Size
60 mm x 95 mm x 10 mm NSK 54212 فحوى الكرات	225	3,2 / Factor min. lo	FAG	765000 N / Static lo
Toyana 53320U+U320 فحوى الكرات	98	241 mm	98 mm	4 mm
25 mm x 62 mm x 15 mm NSK 25TAC62BDDG فحوى الكرات	177,8 mm	2,89 Kg	177.8x227.012x30.162	1300 r/min
165 mm x 220 mm x 18 mm KOYO 239732B فحوى الكرات	48	26	4.000	AST
Toyana 51106 فحوى الكرات	3,3	NSK	224 mm	700 mm
60 mm x 110 mm x 10 mm FAG 52215 فحوى الكرات	28,5 mm	14,288	24,6 mm	16 mm
Toyana 54316U+U316 فحوى الكرات	3 mm	7 mm	40000 r/min	MF137
INA GT37 فحوى الكرات	35	39,5 kN	35 mm	0,062 Kg
50 mm x 110 mm x 15 mm ISB 54312 U 312 فحوى الكرات	3,5 mm	Timken	58,738 mm	73,025 mm
100 mm x 180 mm x 34 mm FAG 7602100-TVP فحوى الكرات	290 mm	200x280x133	710 r/min	240 mm
40 mm x 72 mm x 15 mm NSK 40TAC72B فحوى الكرات	8,1 kN	6300UU	10x35x11	3,45 kN
KOYO 53408U فحوى الكرات	44,45 mm	190,5 mm	317,5 mm	190,5