وإذ تضع اقتحام

إرسال

NSK's thrust bearings sustain only axial loads, but they are suitable for heavy loads and have high axial rigidity. Spherical thrust roller bearings contain convex rollers and have a self- aligning capability and are free of any influence of mounting error or shaft deflection. Standard cages are machined brass, where the E-type offers a pressed cage for high load capacity.These are thrust bearings containing convex rollers. They have a self-aligning capability and are free of any influence of mounting error or shaft deflection. Besides the original type, the E type with pressed cages for high load capacity is also available. Their bearing numbers are suffixed by E.
For horizontal shaft or high speed application, machined brass cages are recommended. For details, contact NSK. Since there are several places where lubrication is difficult, such as the area between the roller heads and inner ring rib, the sliding surfaces between cage and guide sleeve, etc., oil lubrication should be used even at low speed. The cages in the original type are machined brass.

عرض المزيد

Bearing Number	Bore Dia	Outer DIa	Width	Size
SKF BFSB 353312/HA1 مدبب أسطواني	60 mm	4,5 mm	95 mm	60
SKF BFSB 353210 أسطواني ، وإذ تضع اقتحام	9,55 kN	FYH BEARING UNITS	6 mm	22,2 mm
SKF BFSB 353901/HA4 وإذ تضع اقتحام	161,5 mm	123 mm	100	114,3 mm
SKF 351573 بكرة إبرة التوكيل التوجه العامة	104 mm	Single Row	38,000 N	31 kN
SKF BFSB 353247 العرف مع جمعيات	86	4 mm	86 mm	4 mm
SKF BFSB 353201 تشديد مع	20 mm	19 mm	15	22,1 kN
SKF BFSB 353285/HA4 مدبب أسطواني	KOYO	95	117 kN	RNA3055
SKF BFS 8000/HA1 أسطواني ، وإذ تضع اقتحام	18 mm	160 mm	18	18 mm
SKF 350998 وإذ تضع اقتحام	155 mm	170 mm	127 kN	110
SKF 353164 بكرة إبرة التوكيل التوجه العامة	53,975	4,8 mm	75,01 mm	73,03 mm
SKF BFSB 353205 العرف مع جمعيات	60	38,3	38,3 mm	90 mm
SKF 351468 A تشديد مع	46.3 mm	0.082 Kg	1 mm	1.4 mm